Marine coolant types: OAT vs conventional

Reference for the YMH Engineer · Published 24 Jul 2026 · Updated 14 Nov 2026

Caterpillar's fluids recommendations (SEBU6251-34, Coolant Terminology, p.65-66) define: "Extended Life Coolant (ELC): A coolant that relies largely on organic inhibitors for corrosion and cavitation protection." "Carboxylate is an example of organic corrosion and cavitation inhibitors." "Conventional coolant: A coolant that relies largely on inorganic inhibitors for corrosion and cavitation protection." "Silicates and nitrites are examples of inorganic inhibitors." (p.65): "Do not use commercial extended life coolants with more than 125 ppm silicon (present in the coolant in the form of silicate)". Table 27 footnote (5) (p.70) names "Organic Acid Technology (OAT) Extended Life Coolant (ELC)". Table 27 (p.69, Cat commercial diesel engines) lists service hours of "12 000 hours or 6 years" for Cat ELC and "3 000 hours or 3 years" for Cat DEAC. (p.73): "Do NOT mix brands or types of coolant." "Mixing Cat ELC or Cat ELC Advanced with conventional coolants and/or conventional SCA reduces the Cat ELC service life." (p.74): "Do not use a conventional coolant to top-off a cooling system that is filled with Cat ELC or Cat ELC Advanced." (p.71): "Caterpillar recommends a 50 volume percent glycol and water of proper quality." (p.67): "Do not use ethylene glycol in concentrations that exceed 60 percent glycol." "Do not use propylene glycol in concentrations that exceed 50 percent glycol because of the reduced heat transfer capability." (p.66): "Distilled water or deionized water is recommended to add to glycol or to water based coolants in engine cooling systems." (p.68): "To check the concentration of glycol, use the 245-5829 Coolant/Battery Tester/Refractometer or 360-0774 refractometer." (p.71): "Do not use a commercial coolant/antifreeze that only meets the ASTM “D3306” or equivalent specification."

Cummins Onan MDKBH Operator Manual (981-0180 Issue 5, p.48, 5.6.5): "Use a high quality, fully formulated, ethylene glycol coolant with rust inhibitors and coolant stabilizers that meets ASTM D6210 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines." It says "the generator set is shipped with the recommended 50/50 mixture of water and ethylene glycol which provides protection to -37 °C (-34 °F)". "In warmer climates and sea water environments, a 60/40 mixture of water/ethylene glycol is recommended." Its Periodic Maintenance Schedule (Table 2, p.35) marks "Replace Coolant, Pressure Cap and" Thermostat under "Every 2 Years".

Cummins Bulletin 5410779 (p.2, QSB6.7 column) lists Engine coolant antifreeze, Check, "500 hrs or 1 year", and Cooling system, Flush, "2000 hrs or 4 years".

Source: Caterpillar Operation and Maintenance Manual, Cat Commercial Diesel Engine Fluids Recommendations (Special Publication For All 3500 Series, C175, and smaller Commercial Diesel Engines), SEBU6251-34 (November 2025), p.65, p.66, p.67, p.68, p.69, p.70, p.71, p.73, p.74, https://caterpillar.scene7.com/is/content/Caterpillar/CM20260629-e65f9-af2f9 (accessed 2026-11-14); Cummins Onan Operator Manual, Marine Generator Set MDKBH (Spec A-E), 981-0180 (Issue 5), 10-2013, p.35, p.48, https://www.cummins.com/sites/default/files/2024-07/cummins-onan-manual-mdkbh.pdf (accessed 2026-11-14); Preventative Maintenance Schedule For Cummins QSB6.7, QSC8.3, QSL9 and QSM11 Engines, Bulletin 5410779 (5/17), p.2, https://mart.cummins.com/imagelibrary/data/assetfiles/0032370.pdf (accessed 2026-11-14)

Keep this engine's log in Yacht Masters Hub