Coast Guard MSD rules: Type I, II and III explained

Reference for the YMH Engineer · Published 24 Jul 2026 · Updated 15 Nov 2026

The short answer: If your boat has an installed toilet and you run it on US waters, Coast Guard rules require a working, Coast Guard certified marine sanitation device (MSD) (33 CFR 159.7(a), https://www.ecfr.gov/current/title-33/part-159; US EPA, https://www.epa.gov/vessels-marinas-and-ports/marine-sanitation-devices-msds). Portable toilets ("porta-potties") are not covered (EPA, same page). There are three types. Type I treats sewage and discharges it with no more than 1,000 fecal coliform per 100 mL and no visible floating solids; it is allowed only on boats 65 feet (19.7 m) or less. Type II treats to a stricter standard, 200 fecal coliform per 100 mL and 150 mg/L suspended solids, and is allowed on any size boat. Type III is usually a holding tank that stops any overboard discharge, allowed on any size boat (33 CFR 159.3 and 159.7). Untreated sewage can't be discharged within 3 miles of shore (EPA FAQ, https://www.epa.gov/vessels-marinas-and-ports/vessel-sewage-frequently-asked-questions). In a no-discharge zone you must secure a Type I or II so it can't discharge, for example by closing the seacock and removing the handle, padlocking it, or using a non-releasable wire tie. With a Type III, you secure each valve leading overboard the same way (33 CFR 159.7(b) and (c)).

Type I: flow-through treatment device that discharges effluent meeting fecal coliform limits (1000/100mL or less) and no visible floating solids. Legal to discharge outside no-discharge zones. Requires 12V/24V power and salt makeup.

Type II: same concept but with higher treatment standard (200 fecal coliform/100mL), allowed on any size boat; required for treat-and-discharge on boats over 65 ft.

Type III: no discharge, a holding tank only. Effluent stored and pumped out at a shore station. Simplest, most common on recreational boats.

All three types require the toilet, hoses, tank, vent, and pumpout fitting to be properly plumbed with USCG-approved sanitation hose (marked "sanitation hose", regular hose permeates).

Source: US Coast Guard CFR Title 33 Part 159 (paraphrased)

Keep this engine's log in Yacht Masters Hub